DISPENSEROBOTICS.COM
Can Pump System
A can pump feeds material straight from its original pail or can. A follower plate rides down on the material, so air stays out and the walls are wiped clean. TCP pumps are air-driven, move about 20 cc per cycle, and handle 1,000 to 600,000 cps. The TCP-1800N takes an 18 kg pail at 20:1 (14 MPa) or 10:1. The TCP-101N takes 1 kg cans and the TCP-103N/105N takes 3 to 5 kg cans, both at 10:1 (7 MPa) or 20:1.
Compare models
| Model | Container | Pump ratio | Output pressure | Viscosity |
|---|---|---|---|---|
| TCP-1800N | 18 kg pail | 20:1 (10:1) | 14 MPa (7 MPa) | 1,000 – 600,000 cps |
| TCP-101N | 1 kg can | 10:1 (20:1) | 7 MPa (14 MPa) | 1,000 – 600,000 cps |
| TCP-103N/105N | 3 – 5 kg can | 10:1 (20:1) | 7 MPa (14 MPa) | 1,000 – 600,000 cps |
Frequently asked questions
What follower plates are available?
Wiper plate (WP), disposal plate (DP) and no plate (NP).
What does the pump need?
Shop air between 0.2 and 0.7 MPa.
What are the wetted parts?
Aluminum body, UHMW-PE and FKM seals, SUS303F rod and shovel, TPE or NBR follower plate.
Not sure which one fits? Send us your material data sheet and what you need to dispense. Contact us
Related: Pro Can Pumps (20 kg, metered) · Material Feeding System (MFS)