DISPENSEROBOTICS.COM
Nano Pen System
A Nano Pen is a pen-type, motor-driven dispenser for very small shots. A screw drives the barrel plunger, so there is no air pressure to drift and the volume is set in steps. The Nano Pen 3 starts at 1.9 µL per step on a 3 cc barrel; the Nano Pen 30 moves 138 µL per step on a 30 cc barrel. All handle 1 to 500,000 cps.
Compare models
| Model | Barrel | Volume per step (high / normal) | Viscosity |
|---|---|---|---|
| NANO PEN 3 | 3 cc | 1.9 / 3.6 µL | 1 – 500,000 cps |
| NANO PEN 5 | 5 cc | 6.84 / 12.7 µL | 1 – 500,000 cps |
| NANO PEN 10 | 10 cc | 13.4 / 25 µL | 1 – 500,000 cps |
| NANO PEN 30 | 30 cc | 138 µL | 1 – 500,000 cps |
Frequently asked questions
What controls a Nano Pen?
The NPC-10 basic controller (time, steady, sequence and interval modes, RS485 Modbus) or the NPC-10V for the Nano Pen with a valve.
Does it need compressed air?
No. It is motor driven.
Not sure which one fits? Send us your material data sheet and what you need to dispense. Contact us
Related: NPC-10 basic controller · NPC-10V valve controller