DISPENSEROBOTICS.COM
Pressure Tank
A pressure tank feeds a valve or pump from a larger batch than a cartridge or syringe, so you refill less often. All of these are SUS304 stainless with a ferrule-clamp lid, rated 0.5 MPa, with a BSPT 3/8 female material port. Round tanks (SSR) come with a bottom or top port; flat tanks (SSF) have a top port and take a removable inner container. Sizes run 1, 3, 5, 10 and 20 litres.
Compare models
| Series | Shape | Port | Sizes | Rated pressure |
|---|---|---|---|---|
| SSR-xBP | Round | Bottom | 1, 3, 5, 10, 20 L | 0.5 MPa |
| SSR-xTP | Round | Top | 1, 3, 5, 10, 20 L | 0.5 MPa |
| SSF-xTP | Flat | Top, with inner container | 1, 3, 5, 10, 20 L | 0.5 MPa |
How to choose
- If you want the tank to drain completely, choose a bottom port.
- If you want the material line above the fluid level and easier filling, choose a top port.
- If you change materials often or must keep the material off the tank wall, choose a flat tank with an inner container.
- If the material is heavy or filled, add an agitator; if it needs heat to flow, add a jacket heater.
Frequently asked questions
What seals are available?
NBR O-ring as standard, with capsule (Viton), silicone and EPDM O-rings as options.
Can the inside be coated?
Yes. Electrolytic polishing and Teflon coating are options; buff polishing is standard.
Which inner containers fit?
ICF containers in 1, 3, 5 and 10 litres (standard and T-type).
Not sure which one fits? Send us your material data sheet and what you need to dispense. Contact us
Related: Pressure tanks · Inner containers · Jacket heaters · Tank agitators · Level sensors · Material Feeding System (MFS)