DISPENSEROBOTICS.COM
Pro Spray Controller
The PSC-100 runs Pro Spray Pumps (PSP). It sets flow and spray air, stores 32 programs, and offers time, steady and auto modes from a 5-inch touch screen. It talks to a host over RS232 (9-pin D-sub) and accepts an NPN or normally-open start signal from a robot.
Frequently asked questions
Which pumps does it run?
The PSP-015, PSP-050, PSP-150 and PSP-500 Pro Spray Pumps.
What power does it need?
AC 100 to 240 V, 50/60 Hz, 50 W.
What comes with it?
2 m motor cable, 2 m controller cable, power cord and a 2.5 m air tube.
Not sure which one fits? Send us your material data sheet and what you need to dispense. Contact us
Related: Pro Spray Pumps (PSP)